Maintenance of mechanical product design is the key to maintain the good condition of the product, which is of great significance to improve the service life and performance of mechanical products. The following will describe the maintenance measures for different types of mechanical products.

Machinery products are mainly divided into several categories, such as power machinery, agricultural machinery, construction machinery and equipment, and transportation machinery. These machinery products have a wide range of applications in all walks of life, such as agricultural machinery used in agricultural production, power machinery used in energy development, transportation machinery used in cargo transportation, etc. Different types of machinery products have different characteristics, so the maintenance measures are also different.

For power machinery, such as generator sets, internal combustion engines, etc., the maintenance of internal parts is very important. The lubrication system should be checked regularly to ensure that the amount of lubricating oil is sufficient and the oil quality is good. At the same time, the crankcase should be cleaned regularly to keep the inside of the engine clean. The maintenance of the outer surface should not be neglected, such as regularly cleaning the oil stain of the fuselage, checking whether the fuselage has cracks and deformations, etc.

For agricultural machinery, such as tractors, harvesters, etc., exterior surface maintenance is also important. The fuselage should be cleaned regularly to check for rust and deformation. At the same time, for some wearable parts, such as tires, tracks, etc., should be replaced in time. In addition, the connection parts of agricultural machinery should be checked regularly to ensure that the fasteners are not loose.

For construction machinery and equipment, such as excavators, loaders, etc., due to the complex working environment, the maintenance work should be more stringent. In addition to checking the lubrication system and cleaning the fuselage, it is also necessary to pay attention to checking the hydraulic system, electrical system, etc. For parts that are easy to wear, such as buckets, tracks, etc., they should also be replaced in time.

For transportation machinery, such as automobiles, trains, etc., maintenance work is equally important. Regularly inspect key parts such as the engine lubrication system, brake system, and tires. At the same time, it is necessary to wash the body to keep the car tidy.

When carrying out the maintenance of mechanical products, the following matters need to be noted. First of all, it is necessary to carry out maintenance in accordance with the prescribed operating procedures to avoid damage or accidents caused by improper operation. Secondly, it is necessary to use maintenance supplies and tools that meet the regulations to avoid corrosion and damage to mechanical products. Finally, maintenance work should be planned and cyclical, and do not wait until the mechanical product fails to carry out maintenance.

In short, the product design of maintenance machinery is an important part of keeping the product in good condition. For different types of mechanical products, different maintenance measures should be taken. Only correct maintenance can improve the service life and performance of mechanical products and create greater value for enterprises.